Servicios de Extrusión de Titanio
Extrusión de precisión de titanio: perfiles estructurales complejos, tubos de pared gruesa sin costura, formas huecas multicanal. Prensa de 6,000 toneladas, longitud de 12 m, envolvente de ø 350 mm, AS9100D.
Read more Show less
Titanium Extrusion Espectro de Procesos
Three integrated extrusion workflows covering the full titanium profile production spectrum — from hot extrusion of long-length structural profiles to precision post-processing and quality-certified delivery.
Hot Titanium Extrusion
6,000+ Ton Hot Extrusion of Long-Length ProfilesPushing pre-heated titanium billets (950-1050°C) through precision-ground die apertures at 6,000+ metric tons — producing long-length near-net profiles with aerospace-grade surface finish and dimensional accuracy.
- Near-net extrusion of complex asymmetric structural profiles
- Seamless tube and hollow section production through porthole and bridge dies
- Long-length straight profiles (up to 12 m) for structural and architectural applications
- Solid round, rectangular, and custom-shaped bars and rods
Post-Extrusion Processing (Drawing, Straightening, Sawing)
Precision Drawn & Cut-to-Length ProcessingExtruded titanium products requiring secondary drawing, straightening, and cutting-to-length for precision dimensional compliance. From near-net extruded blanks to finished machined components.
- Solid bars and rods in round, hexagonal, and custom cross-sections
- Seamless tube and pipe — ID/OD dimensions from 20 mm to 300 mm with wall thickness down to 2 mm
- Structural angles, channels, T-sections, and other architectural profiles
- Custom asymmetric profiles for aerospace and defense applications
Production Flexibility & Quality Assurance
Flexible Lot Sizes & Multi-Alloy CapabilityOur extrusion facility processes titanium alloys through dedicated die sets with glass-lubricated tooling — delivering near-net profiles that minimize downstream machining requirements and material waste.
- Small-to-medium production runs (500-5,000 kg per order) with flexible alloy changeover
- Titanium Grade 2, Grade 5 (Ti-6Al-4V), and Grade 9 (Ti-3Al-2.5V) — the most commonly extruded titanium alloys
- Surface finish as-extruded: Ra 1.6-3.2 µm (with glass lubrication) — suitable for direct use or minimal post-processing
- Full NDT capability: ultrasonic (UT), dye-penetrant (PT), and dimensional inspection for certification packages
Extrusion Panel de Capacidad
Our extrusion press capacity — press force, maximum profile lengths, billet pre-heat range, and extruded profile diameter limits.
Extrusion Press Force
Industrial-grade hydraulic extrusion press generating extreme, controllable force to push pre-heated titanium billets through precision-ground die apertures.
Max Linear Profile Dispatch
Pushing single-piece uninterrupted alloy structures up to 12 meters in length — accommodating full-length structural profiles without butt-welding or mechanical joining.
Pre-Heat Range
Billet heating in multi-zone controlled atmosphere furnaces ensures uniform temperature distribution prior to extrusion, preventing localized overheating or underheating.
Extruded Profile Diameter Range
Diameter range of extruded solid bars, tubes, and custom profiles — from small-diameter rods to large structural sections.
All specifications measured under controlled conditions per ISO 2768-m and AS9100D. Actual results depend on material grade, geometry complexity, and batch size.
Need to Compress Buy-to-Fly Scrap?
Envíe Planos de Sección Transversal para Revisión Rápida
Upload your extruded profile cross-section drawings (STEP, IGES, PDF) with material grade, dimensional envelope, and annual volume projections for a comprehensive 24-hour extrusion feasibility assessment — including die design analysis, glass lubrication planning, press tonnage verification, and multi-tier pricing.
Enviar para Revisión de ExtrusiónReady to Start Your Project?
Get an immediate engineering review and competitive pricing. Our AS9100D-certified team responds within 48 hours.
Request a Quote