Boze Titanium Manufacturing Center | Titanium Industry Solutions Center — D2 Hub

Industry-Specific Titanium CNC Solutions

Six shop-floor-proven industry solutions verified by AMS / ASTM / ISO / EN standards, real workshop evidence, and full EN 10204 3.1 material traceability. Every application is anchored to a real standard, a real measurement, and a real machine.

Read more
6 Vertical industries
5 Ti grades (5 / 23 / 7 / 12 / 2)
17 Compliance standards
100% EN 10204 3.1 MTR
Aerospace & Defence Medical Implants Marine Hydrofoil Motorsport Subsea & ROV High-End Wearable AS9100D ASTM F136 AMS 4928 EU PED 2014/68/EU NACE MR0175 EN 10204 3.1 NACE SP0198 ISO 10993

The Boze Titanium Industry Applications Hub curates six vertical-industry titanium CNC solutions — aerospace structural brackets per AMS 4928 / AS9100D with ±0.005 mm 5-axis tolerance, medical bone screws per ASTM F136 / ISO 5832-3 with Ra ≤ 0.2 µm electropolish and ISO 10993-5 cytotoxicity Grade 0, marine hydrofoils per Grade 7 Ti-0.2Pd with 2000+ hour ASTM B117 salt-spray zero pitting, motorsport wheel lug bolts per AMS 2480 with 95% UTS proof-load, subsea sensor housings per NACE MR0175 with 30 MPa hydrostatic proof and 1×10⁻⁹ mbar·L/s helium leak, and high-end EDC wearables per ISO 10993-5 with PVD decorative coating. Every claim is anchored to a real workshop parameter, a real cited standard, and a real machine spec.

Procurement engineers and design leads in aerospace, medical, marine, motorsport, subsea, and high-end wearable sectors can filter the six industry solutions by sector, titanium grade (5/23/7/12/2), compliance standard (AMS 4928 / ASTM F136 / EU PED / NACE MR0175), and component function (structural / fastener / housing / implant / hydrofoil / wearable). The Hub's floating Industry RFQ Drawer carries the selected industry context into /rfq/?app=...§or=...&grade=...&std=... so vertical-industry application engineers respond with the right context from the first email.

Cross-Industry Competence Matrix

6 vertical industries · 5 titanium grades · 17 industry-specific standards · 1 manufacturing center.

5-axis tolerance
±0.005 mm
MTR coverage
EN 10204 3.1 — 100%
Salt spray (Grade 7)
≥ 2000 hr
Weight saving
−42 to −45%
0 filters active
Industry Sector
Material Grade
Compliance Standard
Component Function
Showing 6 industry solutions
Aerospace & DefenceFeatured Industry SolutionCompliance & Capability

Aerospace & Defence Structural Brackets — 5-Axis CNC

5-axis CNC machined Grade 5 titanium (AMS 4928) structural brackets with 42% weight saving vs 4140 chromoly steel, full MTR EN 10204 3.1 traceability, and CMM inspection per ISO 10360-2.

Material Grade:AMS 4928 / ASTM B348 (annealed bar/billet)
Industry Challenge

Aerospace Tier-1 buyers need AS9100D compliance + AS9102 First Article Inspection + 100% MTR EN 10204 3.1 traceability. Steel 4140 brackets add 42% weight vs titanium; aluminium 7075 lacks the required fatigue life under cyclic vibration.

Boze Titanium Solution

5-axis simultaneous CNC milling on DMG MORI / Haas UMC-class machines, 70+ bar through-tool coolant, trochoidal tool paths for thin-wall pockets, controlled 0.005 mm/mm thermal drift. Every lot ships with AS9102 FAIR, CMM report, and heat-locked MTR.

Workshop Evidence
Weight saving vs 4140 chromoly steel
−42%
vs 7.85 g/cm³
ASTM B348 / AMS 4928
5-axis positional tolerance
±0.005 mm
on 200 mm envelope
ISO 10360-2 / ASME Y14.5
Ultimate tensile strength (Grade 5 annealed)
≥ 895 MPa
vs 1020 MPa heat-treated
ASTM E8 / AMS 4928
Compliance Chain
AS9100DISO 9001:2015AMS 4928ASTM B348+3 more
Request Industry RFQ
Medical Implants & SurgicalFeatured Industry SolutionCompliance & Capability

Medical Orthopedic Bone Screws & Trauma Plates — Grade 23 ELI

ASTM F136 Grade 23 (Ti-6Al-4V ELI) bone screws and trauma plates with mirror-polished surface finish Ra ≤ 0.2 µm, 100% ultrasonic cleaned, color-anodized for size identification, and full ISO 5832-3 + ISO 10993 biocompatibility documentation.

Material Grade:ASTM F136 / ISO 5832-3 (Ti-6Al-4V ELI)
Industry Challenge

Implant buyers require QMS + ASTM F136 Grade 23 ELI (not commercial Grade 5) + validated biocompatibility per ISO 10993 + zero surface contamination. Stainless 316L implants cause nickel-ion sensitisation; CoCrMo is not MRI-conditional. Tight thread tolerances (M1.0–M4.0) and mirror finishes (Ra ≤ 0.2 µm) are not achievable on a general-purpose shop floor.

Boze Titanium Solution

Dedicated ISO Class 7 cleanroom production cell, single-point micro-turning for threads (M1.0–M4.0), 5-axis milling of plates, electropolish + Type II anodize for color size-coding, 100% ultrasonic cleaning in deionised water. Full DMR (Device Master Record) per §4.2.3 with biocompatibility reports.

Workshop Evidence
Surface finish (post-electropolish)
Ra ≤ 0.2 µm
mirror-grade for bone-contact
ASTM F86 / ISO 25178
Cytotoxicity (ISO 10993-5)
Grade 0 (no reactivity)
vs negative control
ISO 10993-5
Interstitial element control (Grade 23 ELI)
O ≤ 0.13 wt%, Fe ≤ 0.25 wt%
vs ASTM F136 §6.1 max
ASTM F136
Compliance Chain
ISO 9001:2015ASTM F136ASTM F86+3 more
Request Industry RFQ
Marine & Superyacht HydrofoilsFeatured Industry SolutionCompliance & Capability

Superyacht Hydrofoil Mast Step & Strut Fittings — Grade 5 / Grade 7

Custom 5-axis CNC machined Grade 5 / Grade 7 (Ti-0.2Pd) titanium mast steps and foil strut fittings for superyacht hydrofoils — zero pitting corrosion after 2000+ hours ASTM B117 salt spray, full MTR EN 10204 3.1, hydrofoil-optimised aerofoil profile.

Material Grade:ASTM B348 (bar) / ASTM B367 (casting) — Grade 7 Ti-0.2Pd
Industry Challenge

Superyacht hydrofoils combine permanent seawater immersion, high cyclic loads (up to 10⁷ cycles per regatta season), and galvanic interaction with carbon-fibre masts. Aluminium bronze corrodes; 316L stainless suffers pitting in < 200 hr ASTM B117. Buyers need DNV / Lloyd's Register traceable MTRs and NACE-grade seawater performance.

Boze Titanium Solution

Grade 7 (Ti-0.2Pd) for all wetted surfaces — its 0.2% Pd addition shifts the corrosion potential into the passive region, delivering 2000+ hr ASTM B117 salt-spray survival with zero pitting. 5-axis contoured machining for NACA / Eppler / custom hydrofoil aerofoils. Insulating PEEK washers at mast-step / carbon-fibre interface.

Workshop Evidence
Salt spray survival (ASTM B117)
≥ 2000 hr, 0 pitting
Grade 7 vs 316L < 200 hr pitting
ASTM B117 / NACE SP0198
Seawater corrosion rate (Grade 7)
< 0.025 mm/yr
vs 316L 0.18 mm/yr in still seawater
ASTM G59 / NACE TM0169
Aerofoil profile tolerance
± 0.05 mm
on NACA / custom hydrofoil sections
ISO 10360-2 (CMM verification)
Compliance Chain
ISO 9001:2015ASTM B348ASTM B367EN 10204 3.1+2 more
Request Industry RFQ
Motorsport & AutomotiveIndustry RFQ

Motorsport Wheel Lug Bolts & Suspension Fasteners — Grade 5

CNC thread-rolled + roll-formed Grade 5 (Ti-6Al-4V) wheel lug bolts, suspension tie-rod ends, and caliper pins with 45% weight saving vs chromoly steel, ≥ 1100 MPa tensile strength, AMS 2480 solid-film lubricant, and per-bag MTR EN 10204 3.1.

Material Grade:AMS 4928 (bar) → CNC thread-rolled per ISO 4759-1
Industry Challenge

Reducing unsprung mass on a GT3 / Le Mans Prototype directly improves lap time (≈ 0.03 s/lap per kg removed from rotating + reciprocating mass). Steel chromoly 8740 lug bolts add 28 g each over a 20-bolt wheelset = 0.56 kg of unsprung mass. Aluminium lug bolts fail under the 95% UTS proof-load requirement. Buyers need per-bag traceability and proof-load test certificates.

Boze Titanium Solution

CNC thread-rolled (not cut) Grade 5 lug bolts with solution-treated & aged (STA) condition delivering ≥ 1100 MPa UTS. AMS 2480 solid-film lubricant (PTFE + MoS₂) prevents thread galling. Each bolt proof-load tested to 95% UTS and dimensionally verified per ISO 4759-1. Per-bag MTR EN 10204 3.1 with heat number.

Workshop Evidence
Weight saving vs chromoly 8740
−45%
per M14×1.5 lug bolt
FIA GT3 §5.4 / ISO 4759-1
Ultimate tensile strength (STA condition)
≥ 1100 MPa
vs 8740 ~1240 MPa with higher mass
ASTM E8 / AMS 4928
Proof-load test
95% UTS, 100%
every bolt tested before bag
ISO 898-1 §9.1
Compliance Chain
ISO 9001:2015AMS 4928AMS 2480EN 10204 3.1
Request Industry RFQ
Subsea, ROV & Oil/GasCompliance & Capability

Subsea & ROV Pressure-Tight Sensor Housings — Grade 7 / Grade 12

CNC machined Grade 7 (Ti-0.2Pd) and Grade 12 (Ti-0.3Mo-0.8Ni) subsea pressure-tight sensor housings, ROV manipulator jaws, and sour-service (H₂S) valve bodies — qualified to 30 MPa hydrostatic pressure, NACE MR0175 for H₂S service, 100% helium leak tested to 1×10⁻⁹ mbar·L/s.

Material Grade:ASTM B348 Grade 7 / ASTM B367 Grade 7 — Ti-0.2Pd
Industry Challenge

Subsea buyers require 30 MPa hydrostatic survival + H₂S compatibility + 1×10⁻⁹ mbar·L/s helium leak rate. 316L stainless suffers crevice corrosion in subsea bolted joints; aluminium bronze dezincifies; super-duplex 2507 is difficult to machine. Subsea OEMs require NACE MR0175 sour-service compliance for any downhole tooling.

Boze Titanium Solution

Grade 7 (Ti-0.2Pd) for seawater immersion — its 0.2% Pd addition prevents crevice corrosion in subsea bolted joints. Grade 12 (Ti-0.3Mo-0.8Ni) for sour (H₂S) service per NACE MR0175. Single-pass 5-axis CNC milling of complex port geometries, orbital TIG welding of end-caps per ASME IX, 100% He leak test, hydrostatic proof test to 1.5× working pressure.

Workshop Evidence
Hydrostatic proof test (housing)
1.5× working pressure, 100%
vs 1.0× typical industry
EU PED 2014/68/EU
Helium leak rate
≤ 1×10⁻⁹ mbar·L/s
vs typical 1×10⁻⁷ spec
ASTM E493 / EN 13185
Seawater crevice corrosion (Grade 7)
0 attack @ 30 days
vs 316L pitting @ 7 days
ASTM G48 / NACE SP0198
Compliance Chain
ISO 9001:2015ASTM B348EU PED 2014/68/EUEN 10204 3.1+2 more
Request Industry RFQ
High-End EDC & Wearable HardwareIndustry Selection

High-End EDC & Microdermal Piercing Tops — Grade 23 ELI

Precision micro-turned and 5-axis milled Grade 23 (Ti-6Al-4V ELI) microdermal piercing tops, EDC pen clips, and wearable hardware — ASTM F136 / ISO 5832-3 implant-grade, PVD colour coating, mirror finish Ra ≤ 0.1 µm, validated to ISO 10993-5 cytotoxicity Grade 0.

Material Grade:ASTM F136 / ISO 5832-3 (Ti-6Al-4V ELI)
Industry Challenge

High-end body jewellery and EDC buyers (CPF, Hinderer, Chris Reeve, AnoTek) want implant-grade materials at micro-feature tolerances, but most jewellery shops use industrial 316L (Ni release) or generic Grade 5 (no biocompatibility documentation). Buyers also demand consistent PVD colour across batches and mirror finishes that hold up to daily wear.

Boze Titanium Solution

Swiss-type micro-turning (for sub-1.5 mm features) and 5-axis micro-milling (for complex surfaces) in an cleanroom. Electropolish to Ra ≤ 0.1 µm mirror finish, optional PVD (ZrN / TiAlN / DLC). 100% visual inspection under 10× stereo microscope. ISO 10993-5 cytotoxicity test report supplied per lot.

Workshop Evidence
Surface finish (post-electropolish)
Ra ≤ 0.1 µm
mirror-grade for body contact
ISO 25178
Cytotoxicity (ISO 10993-5)
Grade 0 (no reactivity)
vs negative control
ISO 10993-5
Feature tolerance (Swiss-type turning)
± 0.02 mm
on sub-1.5 mm micro-features
ISO 2768-mK
Compliance Chain
ISO 9001:2015ASTM F136ISO 5832-3+1 more
Request Industry RFQ

Cross-Industry Material Selector

Side-by-side properties of titanium grades vs traditional engineering materials — the same matrix our application engineers use to recommend the right grade for your operating environment.

MaterialDensity (g/cm³)Tensile Strength (MPa)Seawater / ChemicalBiocompatibilityRelative Cost Index
Ti Grade 5 (Ti-6Al-4V)4.43 g/cm³≥ 895 MPaExcellent (seawater)Limited (not implant grade)$$$
Ti Grade 23 (Ti-6Al-4V ELI)4.43 g/cm³≥ 860 MPaExcellent (seawater)YES (ISO 5832-3)$$$$
Ti Grade 7 (Ti-0.2Pd)4.51 g/cm³≥ 785 MPaBest in class (Pd-stabilised)YES (Pd trace)$$$$
Stainless 316L8.00 g/cm³≥ 485 MPaGood (pitting < 200 hr)NO (Ni²⁺ release)$$
Aluminium 7075-T62.81 g/cm³≥ 572 MPaPoor (galvanic risk)NO (Al toxicity)$
Steel 4140 (chromoly)7.85 g/cm³≥ 1020 MPaPoor (requires plating)NO (Fe/Cr risk)$$

Reference data per ASTM B348 / ISO 5832-3 / supplier datasheets. Real cost varies with form, quantity, machining complexity.

Send your STEP / IGES file for an industry-aware feasibility review

Our vertical-industry application engineers respond within 1–2 business days with a written feasibility report (tolerance band, surface finish expected, CMM strategy, MTR scope, lead time) and a fixed quote.

Send drawing for reviewView compliance hub
About Boze Titanium Manufacturing Center

One Metal. One Focus. Infinite Precision.

Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.

Boze Titanium Manufacturing Center is operated by Baoji Boze Metal Products Co., Ltd.

Certifications verified by ASTM International titanium material specifications (B265, B348, B381, F136, F2924) with full EN 10204 3.1 mill test certification. Our quality system is operated under AS9100D by Baoji Boze Metal Products Co., Ltd.

AS9100D ISO 9001 500+ Clients 15+ Years OEM/ODM
Learn About Us Request a Quote
Explore More: Material Specifications Industry Applications All Services Capabilities