Laser/perforation drilling of sparger pipes
Laser/perforation drilling of sparger pipes capability for titanium components
What is Laser/perforation drilling of sparger pipes?
Laser/perforation drilling of sparger pipes capability for titanium components
Laser processing capability for Laser/perforation drilling of sparger pipes, with precision beam delivery, gas assist systems, and process monitoring for repeatable quality.
Engineering Parameters & Capabilities
Laser drilling of titanium uses pulsed laser energy to create precise holes through percussion or trepanning methods. Hole diameters range from 0.05 mm to 3 mm with aspect ratios up to 20:1, specifically for titanium components. Precision titanium components present unique challenges: Balancing dimensional accuracy with cost per part. Process selection (mill vs. turn vs. EDM vs. laser) optimized for each feature.
| Parameter | Primary Method | Alternative Method |
|---|---|---|
| Hole Diameter | 0.05-3 mm | 0.5 mm min (abrasive) |
| Aspect Ratio | Up to 20:1 | 3:1 |
| Speed | 0.1-2 sec/hole (percussion) | N/A |
Engineering Capabilities & Limits
Laser processing capability for Laser/perforation drilling of sparger pipes, with precision beam delivery, gas assist systems, and process monitoring for repeatable quality.
Hole Types Supported
Heat Control Measures
Pulsed fiber laser with nitrogen assist gas. Pulse energy and frequency controlled to minimize recast layer.
Flatness & Stress Relief
Non-contact process; no mechanical distortion. Vacuum fixturing for thin foil.
Tolerance
+0.02 mm (hole diameter)
Secondary Operations & Downstream Processing
Enhance your component with our integrated downstream services:
Recast Removal
Chemical etching to remove laser recast layer.
Deburring
Deburring for laser/perforation drilling of sparger pipes components.
Dimensional Inspection
Dimensional Inspection for laser/perforation drilling of sparger pipes components.
Surface Treatment as Required
Surface Treatment as Required for laser/perforation drilling of sparger pipes components.
Quality Assurance & Inspection
Inspection Items
- Laser/perforation drilling of sparger pipes specific dimensional verification (CMM / vision)
- Material grade verification (PMI / OES spectrometer)
Quality Standards & Certifications
- ISO 9001:2015 — Quality Management System
- AS9100D — Aerospace Quality Management
- ASTM B265 — Titanium Strip, Sheet, and Plate Standard
Frequently Asked Questions
What titanium grades are suitable for Laser/perforation drilling of sparger pipes?
What tolerances can be achieved with Laser/perforation drilling of sparger pipes?
What quality certifications apply to Laser/perforation drilling of sparger pipes?
What is the typical lead time for Laser/perforation drilling of sparger pipes projects?
Can you provide DFM feedback for my Laser/perforation drilling of sparger pipes design?
Related Laser Processing Capabilities
Other capabilities in the same category.
EB / laser welding of rib-skin assembly
EB / laser welding of rib-skin assembly capability for titanium components
Laser cutting of port holes
Laser cutting of port holes capability for titanium components
Laser cutting + die stamping of crampon spikes
Laser cutting + die stamping of crampon spikes capability for titanium components
Laser engraving (marking)
Laser engraving (marking) capability for titanium components
Laser marking (UDI code)
Laser marking (UDI code) capability for titanium components
Laser marking (traceability code)
Laser marking (traceability code) capability for titanium components
Laser marking
Laser marking capability for titanium components
Laser micro-cutting of tube
Laser micro-cutting of tube capability for titanium components
Laser micro-drilling of orifice disks
Laser micro-drilling of orifice disks capability for titanium components
Laser or waterjet cutting of perforated bottom plates
Laser or waterjet cutting of perforated bottom plates capability for titanium components
Laser / plasma cutting of plate
Laser / plasma cutting of plate capability for titanium components
Laser / waterjet cutting
Laser / waterjet cutting capability for titanium components
Guidance for the professionals who specify titanium
Role-specific answers and resources for engineers and buyers in this industry.
Common questions from this audience
What quality systems and certifications do you hold?
AS9100D, ISO 9001, ISO 13485, NADCAP and ITAR-compliant — with full material traceability and in-house CMM inspection.
How do you verify dimensional quality?
In-house CMM metrology and GD&T validation per ASME Y14.5, with first article inspection reports.
Do you provide engineering support and DFM?
Yes—engineering support for DFM, material selection, and tolerance feasibility.
Related resources
Request a quoteOne Metal. One Focus. Infinite Precision.
Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.
Boze Titanium Manufacturing Center is operated by Baoji Boze Metal Products Co., Ltd.