Boze Titanium Manufacturing Center | Inspection

Spring-back testing (1000+ cycle test)

Spring-back testing (1000+ cycle test) capability for titanium components

Grade 1, Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, Grade 9, Grade 23 Common Grades
CMM envelope: 1200 × 1000 × 800 mm Thickness Range
+0.01 mm (wire diameter) / +0.1 mm (free length) Cutting Tolerance
+0.01 mm (wire diameter) / +0.1 mm (free length) Tolerance
Ra 0.4 µm (no surface defects) Surface Finish
Titanium Coilover Spring Titanium Spring Lock Washer (DIN 127)

What is Spring-back testing (1000+ cycle test)?

Spring-back testing (1000+ cycle test) capability for titanium components

NDT and dimensional inspection service for Spring-back testing (1000+ cycle test), performed by certified technicians per applicable standards.

Engineering Parameters & Capabilities

Coordinate Measuring Machine (CMM) inspection provides quantitative dimensional verification of titanium components against GD&T specifications per ASME Y14.5. Touch-trigger probes, scanning heads, and non-contact laser sensors accommodate geometries from simple prismatic to complex freeform surfaces, specifically for springs. Precision springs for general and aerospace applications present unique challenges: consistent wire diameter (±0.01 mm) and coil spacing. Fatigue life > 10⁷ cycles for aerospace springs. Surface defects (seams, pits) cause early failure.

Parameter Specification
Probe Type Touch-trigger / scanning / non-contact laser
Uncertainty +(1.0 + L/300) µm per ISO 10360
GD&T Full: form, orientation, location, runout

Engineering Capabilities & Limits

NDT and dimensional inspection service for Spring-back testing (1000+ cycle test), performed by certified technicians per applicable standards.

Hole Types Supported

N/A

Heat Control Measures

Temperature-controlled metrology lab at 20±1°C. Components stabilized on granite surface plate for minimum 4 hours before measurement.

Flatness & Stress Relief

Granite surface plate Grade 00 (flatness < 1 µm/m) as reference datum.

Tolerance

+0.01 mm (wire diameter) / +0.1 mm (free length)

Typical Applications & Components

This process is used to manufacture the following titanium components.

Titanium Coilover Spring

Grade 5 Ti-6Al-4V Automotive & Motorsports

Titanium Spring Lock Washer (DIN 127)

Grade 5 Ti-6Al-4V General Industrial

Secondary Operations & Downstream Processing

Enhance your component with our integrated downstream services:

Inspection Report

Full FAIR (AS9102) with a graphical pass/fail color map.

CoC

Certificate of Conformance with material certification traceability.

Shot Peening

Shot peening for spring-back testing (1000+ cycle test) components.

Stress Relief

Polish components for spring-back testing (1000+ cycle test).

Fatigue Testing (S-N curve)

Fatigue testing (S-N curve) for spring-back testing components (1000+ cycle test).

Quality Assurance & Inspection

Inspection Items

  • Spring-back testing (1000+ cycle test) specific dimensional verification (CMM / vision)
  • Material grade verification (PMI / OES spectrometer)
  • Fluorescent Penetrant Inspection (FPI) per ASTM E1417

Quality Standards & Certifications

  • ISO 9001:2015 — Quality Management System
  • AS9100D — Aerospace Quality Management
  • ASTM B265 — Titanium Strip, Sheet, and Plate Standard

Frequently Asked Questions

What titanium grades are suitable for Spring-back testing (1000+ cycle test)?
Spring-back testing (1000+ cycle test) can be performed on Grade 1, Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, and other grades. The specific grade selection depends on the required mechanical properties, corrosion resistance, and end-use application requirements.
What tolerances can be achieved with Spring-back testing (1000+ cycle test)?
Typical achievable tolerances for Spring-back testing (1000+ cycle test) are +0.01 mm (wire diameter) / +0.1 mm (free length). Tighter tolerances may be possible depending on part geometry, material condition, and quantity. Our engineering team reviews each project to determine the optimal tolerance-cost balance.
What quality certifications apply to Spring-back testing (1000+ cycle test)?
All Spring-back testing (1000+ cycle test) operations are performed under ISO 9001:2015 — Quality Management System, AS9100D — Aerospace Quality Management, ASTM B265 — Titanium Strip, Sheet, and Plate Standard certified quality management systems. Full traceability documentation, material certifications (EN 10204 3.1), and inspection reports are provided with each shipment.
What is the typical lead time for Spring-back testing (1000+ cycle test) projects?
Lead times for Spring-back testing (1000+ cycle test) vary by complexity and quantity. Prototype quantities (1-10 units) can typically be completed in 3-7 business days. Production quantities require 15-25 business days. Rush orders are available for qualifying projects. Contact our sales team for a specific timeline.
Can you provide DFM feedback for my Spring-back testing (1000+ cycle test) design?
Yes. We provide free Design for Manufacturability (DFM) analysis for all new projects. Simply upload your CAD file (STEP, DXF, or DWG format) and our engineering team will review your design and provide optimization suggestions within 24 hours.

Related Inspection Capabilities

Other capabilities in the same category.

100% dimensional inspection (CMM)

100% dimensional inspection (CMM) capability for titanium components

100% eddy current testing (ECT) of condenser tubes

100% eddy current testing (ECT) of condenser tubes capability for titanium components

3D CMM inspection of spherical bearing housing bores

3D CMM inspection of spherical bearing housing bores capability for titanium components

3D CMM inspection

3D CMM inspection capability for titanium components

Ballistic testing (per NIJ/MIL-STD)

Ballistic testing (per NIJ/MIL-STD) capability for titanium components

Batch testing (mechanical + metallographic)

Batch testing (mechanical + metallographic) capability for titanium components

Charpy impact testing at -253C for LH2 cryogenic hardware

Charpy impact testing at -253C for LH2 cryogenic hardware capability for titanium components

Charpy impact testing at -253C

Charpy impact testing at -253C capability for titanium components

CMM alignment of hanger interface

CMM alignment of hanger interface capability for titanium components

CMM blade profiling

CMM blade profiling capability for titanium components

CMM contour inspection (+-0.2mm)

CMM contour inspection (+-0.2mm) capability for titanium components

CMM dimensional inspection (+-0.01mm)

CMM dimensional inspection (+-0.01mm) capability for titanium components
Audience-first guidance

Guidance for the professionals who specify titanium

Role-specific answers and resources for engineers and buyers in this industry.

Quality & compliance Procurement Design engineering

Common questions from this audience

What quality systems and certifications do you hold?

AS9100D, ISO 9001, ISO 13485, NADCAP and ITAR-compliant — with full material traceability and in-house CMM inspection.

How do you verify dimensional quality?

In-house CMM metrology and GD&T validation per ASME Y14.5, with first article inspection reports.

Do you provide engineering support and DFM?

Yes—engineering support for DFM, material selection, and tolerance feasibility.

Related resources

Request a quote
About Boze Titanium Manufacturing Center

One Metal. One Focus. Infinite Precision.

Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.

Boze Titanium Manufacturing Center is operated by Baoji Boze Metal Products Co., Ltd.

AS9100D ISO 13485 ISO 9001 500+ Clients 15+ Years OEM/ODM
Learn About Us Request a Quote
Explore More: Material Specifications Industry Applications All Services Capabilities